I hope from this picture you can see our kitchen has good bones, tall cabinets that go all the way to the ceiling and they're solid wood which is a plus. We have big plans for our tiny kitchen, on a tiny budget! As with most of our DIY projects we've done over the years we plan on DIYing most of it, and getting help from the Professionals along the way { counters installed, electrical } Here's my quick rundown of our plan, I will do an in-depth one very soon, since our old plan is dated. We are re-placing our the outdated tile counters with solid surface counters, new stainless steel sink, updating the back splash with subway tile, adding hardware and installing a vent hood. Currently we have an outdated ceiling vent, think old school ceiling vent. Not cute, freaking odd. We also plan on installing a pantry cabinet, again more on that in my kitchen post. Also new lighting, and paint lots of paint { cabinets, walls } Oh and new appliances, one at a time.
Now back D-E-M-O. For anyone planning on removing old tile counter and a back splash I put together a How To.
Supplies & Tools Needed
Face Mask
Safety Glasses
Trash Bin
Broom
Heavy Metal Dust Pan
Crowbar
Hammer
Chisel
Flat head screwdriver
After putting our safety glass and masks on, safety first! First we removed the old light switch / plug covers, then got down business. We started popping off the front of the tile using the nail mover part of the hammer. The popped off pretty easy. Once the corners were off, we were able to see how they attached the tile to the.
Not sure if you can tell in the picture above, but in the past tiles must have broken off because they where glued back on, not a good look.
Then Hasani used the crowbar to pull up the top layer, the top layer was cement board. Using this technique we were able to remove a large layer of our old tile counters quickly.
While Hasani was working on removing the counters, I started working on the back splash. I used a metal chisel, we bought a long time ago to tear up our old tile floor in our kitchen and dining room. I placed the chisel underneath the tile and then hit the chisel with the hammer. The tile popped off one, two at a time.
After the dishwasher side was finished, we moved on to the other side of our small kitchen. Apply the same method, this side proved to be more messy. Lastly we removed the heavy old ceramic sink, good riddance to that sink!
Altogether it took about 2-3 hours to remove our old counter and back splash and plywood underneath the tile board. We cleaned as we went, making everything less messy and dusty. Here's my kitchen now, minus the old white tile with icky brown grout, minus our old fugly sink. We are making progress! I should mention in the pictures below, our stove is pushed way out of the area, we just wanted to make sure our fabricator / installer had easy access to our counters on both sides. After our kitchen demo, I placed my dinnerware back inside my cabinet for safe keeping.
Yesterday we had our counters measured for the template! We really like our fabricator / installer. He was very friendly and helpful and answered all of our questions! He also has a quick turn around time,we should get a phone call next week for a date to schedule our counters being installed!! After our install, I'll share our the cost breakdown and of course the after pictures! After the counters are installed, we'll be removing the old drywall and hanging new drywall. Since we plan on tiling we want a smooth surface as possible.
What do you think so far? Doesn't my kitchen look so much brighter with out the dark grout messing it up? Oh, I can't wait for paint and tile :)
Have to Demo-ed tile before, any helpful tips?
No comments:
Post a Comment