How We Refinished Our Hardwood Floors

Hey Blogland

I'm Hasani aka Mr.CLH this is my first official post so go easy on me lol .

We decided to re-do the floors because they looked every bit of their 50 + years. At one time there was carpet on the floor so in some areas you could see where someone had a hard time removing it and the color of the wood was a huge distraction at times. It didn't feel like us. Our hardwood floors before:


Prepping Our Floors

At first we both had our hearts set on a really dark brown for the new floors but then decided to go with a more natural color Minwax's Early American. After moving all the furniture into the garage and kitchen the first thing my Father and Law and I did was sweep all the floors and used a dry vacuum to remove any dust. Before sanding we taped off all the vents so that the dust wouldn't get stuck in them, we even put a large plastic bag around our bedroom chandelier. I tired really hard not use news paper with good coupons on them but some had to be sacrificed for the good of the house lol.

The Sanding Process

Next we sanded the floors using a drum belt sander and a edge sander (a heavy duty hand held sander for the edges and corners) we rented from HD HOME SUPPLY way cheaper than any other place we looked, and the had a 20% off rental special that weekend, bonus. We used 36 grit sandpaper to start the process. We did a test area in a closet to see how well the old stain was coming up. It's always good to test in an area like the closet.

When sanding the floors you want to so back and forth in the directions of the wood grain, don't stop in one place or you good leave gauges in your wood. My Father in Law used the drum belt sander, we started in the nursery first.


After he finished a room, I used the edge sander for the corners and edges of the floor its really good for the hard to reach areas and around the base boards and corners. It get really tiring since your on knees the entire time (I wore knee pads which really helped) But its the only way to get those hard to reach areas and make your DIY project look professional.




It took us about 12 hours split up between two days to get all the floors completely sanded. I really liked how the bare floors looked. We did one last lap on the floors using a 100 girt sandpaper, gives the wood a nice smooth finish. After the floors were completely sanded we still had to remove dust from the floors (even though there was a bag attached to both sanders) we used a small amount of water and 'damp mopped the areas.' Next we waited for the floors to completely dry before applying the stain.


(The Nursery)



( Tabari's Room )



(Living Room Floor)

We chose the color Early American after a quick trip to Home Depot right after the floors were bare of old stain, we test, new oak wood right in the store, Katrina and I agreed we liked how the color look instantly. Again we used a closet to test the color of the stain making sure the color looked good on our old floors.
We got a GOOD price on 2.5 gallons of Poly, on clearence.


Applying Stain

We used small water container to pour the stain on the floors. We used a lambs wool applicator and lint free towel to apply the stain on the floors. Make sure you apply the stain following the direction of wood grain. Then we wiped the excess stain off using the lint free towel waiting only a few minutes between wiping. We only had to wait a five minutes because the floor was soaking up the stain quick and we didn't want the color to be too dark. After wiping away the first section, I got excited. I could tell the floors where going to look really nice.


The hardest part about working with the stain for me was keeping my hands from touching the walls. I had to touch up paint many parts of our the walls!


Once the entire floor is covered in stain you have to wait 24 hours before applying the second coat thank god we only needed one coat. I think two coats of stain would have been to much. We used almost 2 gallons of the stain we bought.

Applying the Poly

The next day we applied the poly. We did a light sanding using a 120 grit sandpaper and then removed dust. This time we used a floor orbital sander my father brought with him. Before applying the poly, my Father in Law thinned out the poly with paint thinner. By thinning out the paint thinner the poly was easy to pour on the floors. Make sure you talk with your local paint store before before thinning out poly. My Father in Law has lots experience thinning out paint and ploy and knows the ratio (poly & paint thinner). He worked well under my supervision, lol.




Again we used a thin nosed watering can to pour the poly on the floors. My Father in Law applied the poly on the floors, since he is experienced at at. He used a weighted pole, again he followed the grain of the wood floors and was very careful not to leave lap marks. Which can happen easy with poly. We waited another 24 hours before applying the second coat of poly. After the last coat of poly was applied we wait 72 + hours before returning home.

Budget Breakdown:

Floor Sander Rental: $ 32 (after 20% off discount) 24 hr Rental
Edge Sander: $ 21.75 (after 20% off discount) 24 hr Rental
Sand Paper - Gift from Father in Law
2 Gallons of Minwax Early American Stain: $ 43.88 - Used a Lowes $ 10off Coupon at Home Depot! Gotta Love Price Matching
2.5 Gallon of Minwax High Build Poly: $ 26.79 (on clearance! at Lowes)
Oil Varnish Applicator: $ 6.78
Labor for Father in Law's Help: Dinner at Sizzlers, his favorite restaurant: Priceless

Total Cost $ 131.20 to refinished our Living Room, Hallway and Three Bedrooms

While we where at Home Depot looking for stain we noticed an ad for refinishing hardwood floors, the cost $ 4.00 a sq foot. We estimate having our wood floors done though them would have cost us around $ 4000-

Savings, just a measly $ 3800- give or take a few bucks

I love the new floors its dark like we originally wanted and still has natural earth tones. I also like how our wood floors have charactor and like the various shades of color. Here's our floors now (we'll share more picutres of the after, once Katrina and I finish up a few changes in the rooms)


( The Nursery)


(Our Bedroom)

Thanks for reading if you have any questions feel free to ask .Good luck if you decide to take on this project its a lot of work but well worth it.

*Remember to do your the research 1st before taking on this project, prices may vary in your area the stain make take different on your floors.

Mr. CLH

1 comments

Padhma March 14, 2017 at 3:06 AM

Thank you very much for providing this information here. And i am expecting much more article from you.

Housekeeping Services in Mumbai

Post a Comment